Flex GE5 Giraffe® Wall & Ceiling Sander & M Class Safety Vacuum Cleaner

The Flex Power Tools VCE 33 M AC Safety Vacuum Cleaner is fitted with a high-performance turbine that ensures both a higher suction capacity and a high vacuum. The container capacity can be optimally used for dust and dirt, thanks to its flat-fold filter design. Suitable for wet vacuuming with an automatic switch on/off and an appliance socket.

Flow sensor technology monitors the volume metric flow and any dropping of the suction capacity under the prescribed minimum gure is reported by an acoustic signal. Equipped with large wheels and two swivel guide rollers. Scope for tool storage on top of vacuum cleaner and accessories depot for suction nozzles and tubes at the back.

Class M safety vacuum cleaner, suitable for all dusts with OEL values 0.1 mg/m Specifically for mineral and timber dusts (also beech and oak).

Supplied with: 1 x Antistatic Suction Hose with Clip Connection 32mm x 4m, 1 x Flat-Fold Filter PES Class M, 1 x Filter Bag and 1 x PP Waste Disposal Bag.

Specification

• 110v
• Input Power: 1,200 Watt.
• Capacity: Wet: 17 Litres, Dry: 30 Litres.
• Max Air Flow: 4,500 l/min.
• Max Vacuum: 25,000 Pa.
• Filter Surface: 5000cm.
• Size (W x L x H): 565 x 385 x 565mm. 
• Weight: 15.2kg.

Giraffe® Ceiling & Wall Vacuum Sander

• Very handy, light-weight machine with optimum ease of operation. 
• Provides comfortable and ergonomic working conditions
• Revolving edge segment enables the processing of wall/wall and wall/ceiling surface transitions
• Easy guiding: by optimal balance between motor and sanding head
• Reliable force transmission and high flexibility thanks to the flexible drive shaft from
• For decades established “FLEX technology”. Thanks to this design principle the weight on the head of the Giraffe is reduced to a minimum. This facilitates handling
• Gimbal-mounted sanding head provides high flexibility and optimum adjustment for sanding walls and ceilings
• Effective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environment
• Option of connecting the FLEX safety vacuum cleaners to the FLEX Clip system on the guide tube
• Easy handling thanks to ergonomically shaped guide tube made of aluminium. Optionally an auxiliary handle (accessory) can be attached
• Dust-proof on/off switch
• Very flexible thanks to an optional 500 mm extension (accessory) for high rooms, can be attached without any tools
• According to the assortment of sanding paper ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting, polishing
• Very large areas and rooms up to 3.20 m in height can be processed thanks to the optional insert of the GM 320
• The innovative, textile transport system allows the machine and accessories to be transported effortlessly. The Giraffe® does not have to be mounted and is immediately ready for use

Technical attributes
Power input	500 watt
Power output	270 watt
No load speed	1100-1650 rpm
Sanding disc Ø	225 mm
Tool fixture	hook and loop
Tilt angle on the head	100 °
Length	1520 mm
Weight	3,9 kg
Standard equipment
1 velcro sanding disc supersoft
1 clip-on quick clamping ring SH-FC 32